Proudly Serving Greater St. Louis, Springfield & Nearby
Office Hours: Mon - Fri: 8am - 5pm
Weekend Phone Hours: Sat: 9am - 12pm
Our PolyLevel System is a state-of-the-art approach to repairing sunken concrete slabs, such as sidewalks, driveways, patios, pool apron decks, garage aprons, and basement slabs.
This is done by boring small (penny sized) holes in the slab, and using specially designed equipment to inject a structural grade polymer into the void. After the void is filled, the expanding properties of the polyurethane foam allows for an accurate lift and leveling of the slab. Finally, the small holes are grouted and sealed, and the slab is completely restored.
Concrete settlement is common and can cause significant problems, including trip hazards, pooling water, and cracks. There are two common causes of concrete settlement.
Concrete rarely sinks evenly, so cracks are likely to develop as one side sinks faster than the other.
Uneven concrete can cause a safety hazard to you and your family.
Homeowner, Bob B. of Florissant, Missouri discovered separation in between the concrete slabs on the patio of his home. Once he realized the trip hazards that the separation could cause, he gave Woods Basement Systems a call.
Our system design specialist, Brian S. did a home inspection and was able to create a design that would resolve the issue. Foreman, Joshua B. did a PolyLEVEL system installation on the patio of the home. This system takes 4 simple steps to secure and settle concrete slab. PolyLEVEL system is also less destructive and has a quicker cure time than other repair options. Instead of using a concrete and mud mixture, this system uses a high-density foam.
As seen in the picture below, the PolyLEVEL system is not only the quickest but the best solution to slab repair. Bob B. no longer has to worry hazards on the patio of his home.