Before Foundation Repair
As you can see in this photo, the homes foundation walls were showing signs of cracking and failure.
Wall Anchor Foundation Repair
Wall Anchors are designed to repair walls that are sliding inwards, tilting at the top, bowing, and buckling. These wall anchors are made of galvanized steel for a long-lasting solution that will prevent any further inward movement of your walls.
Wall Anchor Installation
Wall anchors work by extending from your wall to the stable, hard packed soil beyond your home. They anchor into these stronger soils and brace the foundation wall, preventing further movement.
Wall Brace System
This is a foundation wall repair system that's designed to stabilize failing basement walls. These steel i-beams will stabilize the wall in its current position without any further adjustment. Over time, the system can be tightened to make bowing or tilting walls straighter.
Installation
The top of each brace is attached to a floor joist near the mudsill at the top of the wall. The specially designed bracket is bolted to the floor joist and contains a large-diameter bolt for adjusting and tightening after the installation.
Basement Floor Installation
To complete the installation of the brace system, each beam will be attached to the concrete foundation floor with a special, bolt-in-place bracket. Unlike other foundation wall repair methods that install from the inside of the foundation walls, this system spans the entire height of the foundation walls. This makes it suitable for repairing walls that bow and buckle from the middle.