Woods Basement Systems, Inc. Before & After Photos

A slab of concrete connecting the driveway to the sidewalk was sinking, causing a large step to appear. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will improve the safety of the driveway and restore peace of mind for years to come!

Water was leaking in a basement in Saint Louis, MO, causing issues. To fix this, the WaterGuard System was installed. These drainage pipes intercept water at the perimeter of the basement and drain it toward the sump pump system. This system has a design that will drain any wall seepage without allowing dirt and debris from the floor to enter and clog the pipes. This system will keep the basement dry and restore peace of mind for years to come!

Water leaked from a basement window in Saint Louis, MO, and pooled onto the floor. To solve this issue, a WellDuct was installed. This will drain water from the window well and into the WaterGuard System, guiding it to the sump system where it will be pumped out of the house. Thanks to these systems, this basement will remain dry and stay clean for years to come!

A foundation was becoming unstable in a basement in Saint Louis, MO, so the PowerBrace system was installed. This will permanently stabilize the foundation and eliminate any inward movement. This will also reverse the effects of wall failure, straightening the walls to their original position and closing the cracks to prevent water leakage. This foundation will remain stable and restore peace of mind for years to come!

A concrete slab was settling near steps leading up to a house in Saint Louis, MO, causing it to sink and crack. To solve these issues, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. This will improve the safety of the concrete and restore peace of mind for years to come!