Woods Basement Systems, Inc. Before & After Photos

Moisture and outside debris were entering a crawlspace in Kirkwood, MO, causing issues. To fix this, the CleanSpace Encapsulation System was installed. This will completely isolate the crawlspace from the earth and reduce the humidity level. Any mold growth will also be eliminated, making the whole house healthier. The white color will also brighten the crawlspace and make it easier to see inside it. This crawlspace will remain dry and clean for years to come!

A sump pump was failing to run when the power went out in Saint Louis, MO, so the UltraSump Battery Back-Up Pumping System was installed. This will come in handy if the power goes out in the future. It will automatically turn on if the primary pump fails to run. This will provide reliability and restore peace of mind for years to come!

A concrete driveway was settling in Saint Louis, MO, causing the slabs to sink and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the driveway and restore peace of mind for years to come!

Water was leaking down a basement wall in Saint Louis, MO, causing concern. To solve this issue, the CleanSpace Basement Wall System was installed. This will prevent water vapor from permeating the basement walls. The white color will also brighten the basement, reflecting the light. Any wall leaks will also be drained down to the perimeter drainage system. This basement will now remain clean and dry for years to come!

A driveway was sinking in Saint Louis, MO, and becoming unlevel where it meets the garage. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. This will improve the safety of the driveway and restore peace of mind for years to come!