Woods Basement Systems, Inc. Before & After Photos

Cracked and settled walls had developed due to water damage that the home endured. To restore the home's foundation, Team Woods' head foreman, Kevin J., and his team installed push piers to lift the foundation back into its original place.

Water was entering a basement in Columbia, MO through sliding doors. To solve this issue, TrenchDrain was installed. This drainage system will catch the water before it can enter the basement, and drain it safely away. This basement will remain dry for years to come!

A foundation was cracking in a basement in Columbia, MO, causing concern. To fix this, GeoLock Wall Anchors were installed. These will permanently stabilize the wall, straightening it to its original position and keeping it in place. The cracks will also be closed so that no water can leak through. This foundation will remain stable and restore peace of mind for years to come!

Moisture was entering a crawlspace in Columbia, MO, causing the support beams to rot and corrode. To solve these issues, the CleanSpace Encapsulation System was installed. This will completely isolate the crawlspace from the earth, dramatically reducing the humidity level. This will also eliminate mold growth and make the whole house healthier. The white finished side will brighten the crawlspace and will allow one to easily see inside. Additionally, the SmartJack System was installed. This will stabilize the beams and floor joists in the crawlspace and lift the floor above it back toward its original elevation. Floor bounce caused by weakened joists or excessive spans will also be reduced. Thanks to these systems, this crawlspace will remain dry and stable for years to come!

A concrete driveway was sinking in Columbia, MO, causing a large step to form where it meets the garage. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the concrete and restore peace of mind for years to come!