Woods Basement Systems, Inc. Before & After Photos

Ryan M. of Sikeston, Missouri was shocked when he discovered that his home's crawl space was collecting water. He knew that standing water and moisture could cause rotting and mold growth, so he did not want to ignore the problem. He called Woods Basement Systems for help.

Design specialist Jacob K. assessed the situation and discussed the best option with the homeowner. Foreman Joshua B. then traveled to the home to install a CleanSpace encapsulation system. The CleanSpace encapsulation system is a durable plastic liner that is placed on the floor and up the walls of the crawl space. It acts as a vapor barrier, completely seals the crawl space from the earth, and brightens the crawl space.

Ryan M. no longer has to worry about any moisture entering his home's crawl space and causing damage. He now has a dry and waterproof crawl space.

Support posts were failing in a Sikeston, MO crawlspace, causing the floor beams to shift. To solve this issue, the SmartJack System was installed. This will stabilize the beams and floor joists in the crawlspace and lift the floor above it back toward its original elevation. Floor bounce caused by weakened joists or excessive spans will also be reduced. This crawlspace will remain stable and restore peace of mind for years to come!

Moisture was entering a crawlspace in Sikeston, MO, creating a damp and musty atmosphere. To solve this issue, the CleanSpace Encapsulation System was installed. This will completely isolate the crawlspace from the earth, dramatically reducing the humidity level. This will also eliminate mold growth and make the whole house healthier. The white finished side will brighten the crawlspace and allow one to see inside easily. A SmartSump was also installed. This sump system is designed just for crawlspaces and will pump out any water that enters it. Thanks to these systems, this crawlspace will remain dry and clean for years to come!

A concrete sidewalk leading up to a house in Sikeston, MO was sinking, causing it to become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will improve the safety of the sidewalk and restore peace of mind for years to come!

This homeowner in Sikeston, MO, had issues with the cinder blocks supporting his crawlspace ceiling. Since they weren't doing their job, they were replaced with the SmartJack support system, which will hold the crawlspace up without the possibility of crumbling like stone. This will keep the crawlspace strong and supported, as well as the floor above, for years to come.