Concrete Lifting and Leveling Before & After Photos

An empty void was forming under a concrete porch in Lake Saint Louis, MO, so the PolyLevel System was installed. This two-part urethane polymer expands into a rigid, structural foam to fill the void under the porch. Our technique offers quick cure times, high compressive strength, and minimal disruption during installation. This will prevent future problems and restore peace of mind for years to come!

A concrete driveway in Lake St. Louis, Missouri started cracking due moving ground soils. To fix this issue, Woods installed the PolyLevel System. This system consists of a highly durable foam that is injected directly beneath the pavement. As it cures, the foam lifts the concrete back to its original position. Thanks to the install, this driveway will remain in good condition for decades to come.

A concrete floor was cracking inside of a home in Defiance, MO, so the PolyLevel System was installed. This will stabilize, lift, and level the concrete slab with high-strength polyurethane foam. This is a unique approach to repairing sinking concrete.  After drilling small holes into the concrete, a polymer foam is injected into the concrete slab to stabilize the surface. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up for good!

Heather of Saint Albans, Missouri experienced sinking concrete slabs on her patio so, she decided to call Woods Basement Systems for help. Upon further inspection, systems design specialist, Peter N., found a solution and recommended PolyLevel for the job.

Foreman, Andrew T., installed the PolyLevel. PolyLevel is a high density polyurethane formula that permanently lifts and stabilizes sinking concrete slabs. First, a small, dime-sized hole is drilled into the concrete and then the polymer is injected. After that the hole is covered up with cement, so there is no worry of mismatched slabs.

Heather Z. can now enjoy her patio!

A concrete patio was sinking in Wildwood, MO, causing the slabs to crack and become severely uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the patio and restore peace of mind for years to come!