Concrete Lifting and Leveling Before & After Photos

A concrete sidewalk leading up to a house was sinking in Ellisville, MO, causing the slabs to become crooked and uneven. To solve this issue, the PolyLevel System was first installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions.

A concrete patio was sinking in Ballwin, MO, causing the slabs to become severely uneven, creating a tripping hazard. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. This is a unique approach to repairing sinking concrete.  After drilling small holes into the concrete, a polymer foam is injected into the concrete slab to stabilize the surface. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. This will improve the safety and enjoyment of the patio for years to come!

Ballwin, Missouri residents Ervin and Virginia G. were troubled by their uneven, cracked driveway. As a result of settling soil, the concrete became uneven. This was a safety concern and it took its toll on their vehicles.

System design specialist Thomas W. designed a solution to restore their driveway. Andrew T., foreman, and his crew installed PolyLEVEL. PolyLEVEL will not settle, so it is a long lasting solution that Ervin and Virginia are pleased with.

Susan from Ballwin, Missouri experienced uneven concrete slabs in her driveway. That can cause damage to vehicles and is considered a tripping hazard, so she decided to call Woods Basement Systems. Systems design specialist, Jeremy R., recommended PolyLevel as a solution. 

Foreman, Andrew T. installed the PolyLevel. PolyLevel is a high density polyurethane formula, or foam and is used to permanently lift and stabilize sinking concrete slabs. First, small holes are drilled into the concrete and then the polymer is injected into the void. 

Susan H. can now safely use her driveway. 

This homeowner wanted to even out and fill in cracks in their concrete garage floor. System Design Specialist Brenton K. from Woods Basement Systems gave them a free estimate on an innovative, long-lasting solution.

Team Woods injected PolyLevel into the cracks for a quick, highly effective application to fill the cracks. PolyLevel is an advanced polymer solution designed to provide instant, reliable support without the hassle or invasiveness of conventional jacking.