Concrete Lifting and Leveling Before & After Photos

A sidewalk leaking up to a house in Saint Louis, MO was settling, causing it to sink into the ground and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This sidewalk will remain level and restore peace of mind for years to come!

Howard of St. Louis, Missouri had a sinking foundation in his garage that prevented the door from closing properly, so he decided to call Woods Basement Systems for a solution. Systems design specialist, Bill F. recommended installing PolyLevel. 

Foreman, Mason S. installed the product. PolyLevel is a polyurethane formula used to permanently lift and stabilize sinking concrete slabs. First, small holes are drilled into the concrete, then the polymer is injected into the void and cement covers the holes. Within 15 minutes of installation, the concrete can be used again. 

Now Howard S. can safely use his garage.

A concrete floor was settling in a Saint Louis, MO basement causing the slab to crack and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety and enjoyment of the basement and restore peace of mind for years to come!

Customer, Gary of St. Louis, Missouri experienced cracks and sinking concrete slabs in his driveway. That can can be a tripping hazard and/or cause damage to vehicles. So, he decided to call Woods Basement Systems for a solution. Systems design specialist, Chris A., found that PolyLeveling would work for the job.

Foreman, Bryan N. installed the PolyLevel. It is a high density polyurethane formula that permanently lifts and stabilizes concrete slabs. First,  small, dime-sized holes are drilled into the concrete. Then, the polymer is injected and the hole are covered up with cement. The concrete can be used within 15 minutes, so there's no long wait for it to settle.

Now, Gary M. has a safe, usable driveway. 

A concrete sidewalk was sinking, causing gaps to appear and cracks to form on the slabs. To solve these issues, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will improve the safety of the sidewalk and restore peace of mind for years to come!