Foundation Repair Before & After Photos

Terrance G was concerned about his foundation. It was settling, causing a side of the house to sink. To solve this issue, Woods installed Push Piers to the side of the house. These will permanently stabilize the foundation and raise it back up to its original position. These will also help close cracks and improve the function of windows and doors. Terrance can now rest easy now that his home's foundation is stable and secure!

A crawlspace in Harrisburg, Illinois, was in need of some foundation support. To remedy the situation, Woods came in and installed the SmartJack System. This system consists of custom-cut steel columns that are placed in a solid base of engineered fill. These beams will effectively add support for the home. Thanks to the install, this crawlspace and home will be stable for years to come.

This homeowner has cracks developing in the corner of their basement wall. The corner relies on the adjacent walls to support it, and both walls had large diagonal cracks, showing that the corner had little to no support left. The solution on one of the walls was the Geo-Lock Wall Anchors. These anchors would help support and stablize the wall, preventing further damage.

This homeowner has cracks developing in the corner of their basement wall. The corner relies on the adjacent walls to support it, and both walls had large diagonal cracks, showing that the corner had little to no support left. The solution on one of the walls was to use Power Braces. There was not sufficient room to install Wall Anchors on this wall, because a neighbor's yard was too close. These metal supports are placed against the wall and bolted down to prevent the wall from bowing, and giving it extra support for the home.

A basement in Effingham, Illinois, was starting to show signs of foundation failure. This situation needed to be addressed sooner rather than later. Woods came out and installed the PowerBrace System to solve this issue. The PowerBrace System consists of zinc-plated steel beams custom fit to the basement height. They are secured to the wall and floor and are anchored to the support beams that hold up the floor. This system can be tightened over time, allowing for adjustments to prevent wall failure. With this installation in place, this home will be stable for many years into the future.