Foundation Repair Before & After Photos

Engineers use simple crack monitoring devices to help determine the extent and direction a structure may be settling.  Settling occurs when supporting soils beneath a structure's footings sink.  This building's settling could be a slow effect compounded by last summers' serious drought in St. Louis.  Push piers from Foundation SupportWorks® were installed to stop this structure from settling further.

Push Piers are driven deep into the ground on the exterior of the home and are embedded in a stable layer of soil.  A heavy-duty steel bracket is installed against the foundation's footing, and steel piers are hydraulically driven through the bracket to bedrock.  The weight of the home is transferred through the piers to the soil, which provides an opportunity for the home to be lifted back toward its original position.  Once installation is complete, the soil is backfilled and the home is permanently stabilized.

Even though this chimney footing on this St. Louis, Missouri  home was at full depth like the basement wall, it nevertheless titled, settling and pulling away from the house.  We installed a Foundation Supportworks® push pier system to help return it to its original position.

This basement in Saint Louis, Missouri used to have bowing walls and water seepage due to hydrostatic pressure. Woods installed wall anchors, so the walls no longer bow in and water stays out.

This house in Saint Louis, Missouri used to have cracks due to a settling foundation. Since Woods repaired the cracks and installed piers below the house, the house is no longer settling.