Woods Basement Systems, Inc. Before & After Photos

Basement leak often occur if a garage is part of the basement.  Severe wind blown rain or flash flooding may leak water beneath the garage door.  Trench drain adds another level of protection for a basement waterproofing system to make sure that the basement will stay dry and stay dry all the time.

The wall anchoring system is designed to hold a bowing in wall in place and stop further inward movement of the wall.

The interior anchor plate is a large single plate attech to the DOUBLE earth anchor plate.  Engineers have caluclated the depth and distance the earth anchor needs to be for the proper working order of the wall anchoring system.  Soil undisturbed is dense and can stop the inward shifting of the loose soil inthe backfill area next to a basement foundation.

Rosalie F would like her basement waterproofed. Water is coming in around the sump system, failing to enter it. 

Sadon B and his crew installed WaterGuard to seal up and drain away water directly to the sump system. IceGuard was also added to prevent the lines from clogging up with ice when they freeze up in the winter. Rosalie can now relax knowing that the water will have a clear path to the sump system!

A sump pump was failing in Saint Charles, MO, not pumping the water out as it should. To solve this problem, the TripleSafe Sump Pump System was installed. This system assures protection from all three problems with an ordinary pump. It can handle a heavy flow of water, thanks to a second pump that will help eliminate the water if the first pump can't keep up. This system also includes an UltraSump battery backup system which turns on if the power goes out and effectively pumps out the water. It also features a removable airtight lid which reduces noise, prevents objects from falling in, and keeps moisture, insects, and odor from coming out of the sump. This basement will remain dry and clean for years to come!

A concrete floor was settling in a barn in Saint Charles, MO, causing large cracks to form and a gap to appear between the floor and the wall. To solve these issues, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slab with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will close the gap and restore peace of mind for years to come!