Woods Basement Systems, Inc. Before & After Photos

A concrete driveway was sinking in Richmond Heights, MO, causing it to separate from the house. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the driveway and restore peace of mind for years to come!

Support posts were failing in a basement in Richmond Heights, MO, causing the floors above to sag. To solve this issue, the SmartJack System was installed. This will stabilize the beams and floor joists in the basement and lift the floor above it back toward its original elevation. Floor bounce caused by weakened joists or excessive spans will also be reduced. This basement will now remain stable and restore peace of mind for years to come!

A sump pump failed to run during a power outage in Richmond Heights, MO, so the UltraSump Battery Back-Up Pumping System was installed. This will come in handy if the power goes out in the future. It will automatically turn on if the primary pump fails to run. This will provide reliability and restore peace of mind for years to come!

Moisture was seeping into a crawlspace in Richmond Heights, MO, causing issues. To fix this, the CleanSpace Encapsulation System was installed. This will completely isolate the crawlspace from the earth and reduce the humidity level. Any mold growth will also be eliminated, making the whole house healthier. The white color will also brighten the crawlspace and make it easier to see inside it. This crawlspace will now stay dry all the time!

A foundation was settling in Richmond Heights, MO, causing cracks to form on the outside of the house. To solve this issue, the Push Pier System was installed. These will permanently stabilize the foundation, and in many cases, lift it back toward its original position. These can also close cracks and improve the operation of windows and doors. This is the least risky solution when the soil conditions are unknown. There is minimal disturbance from installation; installing them is a quick process and will solve the problem once and for all!