Woods Basement Systems, Inc. Before & After Photos

A concrete driveway was settling in Saint Louis, MO, causing the slabs to sink and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the driveway and restore peace of mind for years to come!

A driveway in Saint Louis, Missouri, had some settlement and displacement with a few of the concrete slabs. This is most likely being caused by moving ground soils as the ground heats and cools down. Woods came out and installed the PolyLevel System to address these issues. This system consists of a highly durable foam that is injected directly beneath the concrete. As it sets, the foam lifts the concrete back up to its original position. With this system installed, this driveway will remain level for years to come.

This front porch got a fresh new look thanks to the restoring power of NexusPro™ Joint Sealant and Crack Repair. Combined with SealantPro™, these products seal up those embarrassing cracks in the walkway, eliminating potential safety hazards. The homeowner can now access this front porch with ease!

Rico R from St. Louis, MO was concerned about his foundation in his basement. The bricks were separating and starting to crack. Woods recommended the PowerBrace System to help permanently stabilize the foundation walls. Zinc-plated steel beams were custom fitted to the walls and tightly secured with brackets anchored to the floor and framing above. Rick can now rest easy knowing his foundation is stabilized. 

A concrete sidewalk was settling in front of a home in Saint Louis, MO, causing the slabs to sink and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the sidewalk and restore peace of mind for years to come!