Woods Basement Systems, Inc. Before & After Photos

Water was coming down the walls of a basement in Murphysboro, IL, causing damage. To solve this issue, the CleanSpace Basement Wall System was installed. This will prevent water vapor from permeating the basement walls and drain any leaks down to the WaterGuard System. These drainage pipes intercept water at the perimeter of the basement and drain it toward the TripleSafe Sump Pump System, which will drain water from WaterGuard and below the basement and discharge it out of the house. This system also includes an UltraSump battery backup system, which turns on if the power goes out and effectively pumps out the water. Thanks to these systems, this basement will remain dry and clean for years to come!

A foundation was failing in Murphysboro, IL, as cracks were appearing as it shifted. To solve this issue, GeoLock Wall Anchors were installed. These will permanently stabilize the wall, straightening it to its original position and keeping it in place. The cracks will also be closed so that no water can leak through. This foundation will now remain stable and restore peace of mind for years to come!

A homeowner in Murphysboro, IL wanted to install a proper basement window well, so the SunHouse Basement Window Enclosure was installed. This system gives an attractive, bright, and clean solution that keeps rain out, prevents weeds from growing inside, and reflects natural light into the basement. This will make a dramatic difference inside and outside the home and will restore peace of mind for years to come! 

Moisture was entering a crawlspace in Murphysboro, IL, creating a damp and musty environment. To solve this issue, the CleanSpace Encapsulation System was installed. This will isolate the crawlspace from the ground. It also controls water, humidity, outside air infiltration, and heat loss. The white finish will brighten the crawlspace and make it easier to see inside. This crawlspace will now remain dry and clean for years to come!

A concrete floor was sinking in Murphysboro, IL, causing a gap to form where it meets the walls. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. This is a unique approach to repairing sinking concrete.  After drilling small holes into the concrete, a polymer foam is injected into the concrete slab to stabilize the surface. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. This floor will remain stable for years to come!