Concrete Lifting and Leveling Before & After Photos

A section of a concrete driveway was sinking in Mount Vernon, IL, causing the slabs to become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will improve the safety and convenience of the driveway and restore peace of mind for years to come!

Mary B. of Centralia, Illinois was frustrated with her cracking, uneven driveway. As the soil settled, the concrete began to sink making it unsafe.

Foreman Andrew T. installed PolyLEVEL to restore the concrete to its original position and make it safe again. 

This Centralia, Illinois home's back patio was in a bad way. It was horribly cracked and sunken due to much of the underlying soil washing away over the years. It was ugly and unsafe, and the homeowners called Woods Basement Systems for help. In order to repair the damage, PolyLevel, an expanding composite foam, was injected underneath the damaged slabs. Because PolyLevel dries very quickly, the patio was leveled and ready to be used in just 30 minutes!

Kevin T. of Spaulding, IL had an uneven walkway and driveway. As can be seen in the picture, the concrete slabs in the walkway had sunken away from the step. The uneven areas posed tripping hazards so Kevin called Woods Basement Systems. Woods recommended PolyLevel.

Woods injected PolyLevel through small holes drilled in the concrete slabs. PolyLevel is a two-part foam that expands to fill any voids below the slabs and lift and level the slabs. It’s waterproof so it won’t wash away and it’s lightweight so it won’t add more weight to the soil below, making it a much more permanent concretely leveling solution than other methods like mudjacking. It also cures much quicker, causing less down time than traditional methods like mudjacking.

A concrete patio was sinking in Hillsboro, IL, causing the steps leading up to the house to shift and separate from the house. To solve these issues, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will improve the safety of the concrete and restore peace of mind for years to come!