Woods Basement Systems, Inc. Before & After Photos

Annapolis, MO residents Courtney and Wesley S. were hoping to waterproof their basement, but also make it look great. System Design Specialist Nate C. understood their needs and recommended a BrightWall. It not only gives a semi-finished look but also prevents water vapor from permeating through, keeping the basement drier. Underneath Production Manager Mike J., Foreman Natereace S. and his crew installed this attractive system and now Courtney and Wesley can enjoy their bright and waterproofed basement walls!

Support blocks were failing in a crawlspace in Annapolis, MO, causing concern. To solve this issue, the SmartJack System was installed. These steel support systems can permanently stabilize and level the floor joists and girders in a crawlspace. These add strength and stability to the existing columns and piers. They are unaffected by moisture, as they will not rust, weaken, or be affected by mold. These will lift the floors above back toward their original position, reduce floor “bounce” caused by excessive joist spans, and solve the problem once and for all!

A foundation was continuing to settle and crack even with anchors in Cedar Hill, MO, so the PowerBrace System was installed. This will permanently stabilize the foundation and eliminate any inward movement. This will also reverse the effects of wall failure, straightening the walls to their original position and closing the cracks to prevent water leakage. This foundation will remain stable and restore peace of mind for years to come!

Support Blocks were failing in a Cedar Hill, MO Crawlspace, causing it to become unstable. To solve this issue, the SmartJack System was installed. This will stabilize the beams and floor joists in the crawlspace and lift the floor above it back toward its original elevation. Floor bounce caused by weakened joists or excessive spans will also be reduced. This crawlspace will remain stable and restore peace of mind for years to come!

A concrete driveway was shifting in Cedar Hill, MO, causing the slabs to sink and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. This will make the driveway safer and restore peace of mind for years to come!