Woods Basement Systems, Inc. Before & After Photos

Joe W. of Hillsboro, Missouri discovered that his basement was collecting water after heavy rain showers. He did not want to have to clean up a mess after each storm, so he called Woods Basement Systems.

Design specialist Chris T. assessed the situation and decided that installing a full waterproofing system would be the best option. Foreman William H. then traveled to the home to get the installment started.

The WaterGuard drainage system, pictured above, was one of the components installed. It was placed above the footing of the basement and was then covered with concrete. The WaterGuard drainage system collects and drains any water coming up from the ground before it reaches the surface of the basement floor. 

Joe W. is very happy that he no longer has to worry about any water seeping up through his basement floor. He now has a dry and waterproof basement.

Cindy W was concerned when she noticed that the walkway outside of her home was uneven. So, she decided to call Woods Basement Systems. System Design Specialist Jeremy K was able to come up with a solution to the problem.

Foreman William T used PolyLevel to even out the concrete on Cindy’s sidewalk. PolyLevel is injected into the sinking portion of the concrete and will raise the level of concrete that is sinking. The injection leaves behind a dime sized hole that will be filled in with concrete. 

This Hillsboro, Missouri crawl space was unprotected from the elements due to the lack of an encapsulation system. Team Woods installed a CleanSpace vapor barrier system to seal and maintain a clean crawl space. 

Water was leaking near the wall and floor joint of a basement in Hillsboro, MO, so the WaterGuard System was installed. These drainage pipes intercept water at the perimeter of the basement and will drain it toward the sump pump system. This system has a design that will drain any wall seepage without allowing dirt and debris from the floor to enter and clog the pipes. This basement will remain dry and clean for years to come!

A concrete slab was sinking in Hillsboro, MO, so the PolyLevel System was installed. This will stabilize, lift, and level the slab with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will restore peace of mind for years to come!