Woods Basement Systems, Inc. Before & After Photos

Support beams in a crawlspace were failing, causing issues. To fix this, the SmartJack System was installed. These are steel support systems that can permanently stabilize and level the floor joists and girders in a crawlspace. These add strength and stability to the existing columns and piers. They are unaffected by moisture, as they will not rust, weaken, or be affected by mold. These will lift the floors above back toward their original position, reduce floor “bounce” caused by excessive joist spans, and solve the problem once and for all!

Peggy H. of Clarksville, MO noticed several horizontal hairline cracks that were continuing to spread along her home's foundation wall. She contacted Woods Basement Systems for a free estimate. 

Our system design specialist determined that Geo-Lock Wall Anchors would be the best solution, so our foreman and crew installed them to stabilize the wall.

Peggy can now rest assured that her home's foundation is permanently stable.

This customer's crawlspace in Dexter, MO had water in it and was growing mold. CleanSpace Encapsulation system was installed, and their crawlspace was sealed airtight from any moisture. This will prevent mold from growing, and they won't have to worry about a soggy crawlspace anymore!

A concrete garage floor was sinking in Grubville, MO, causing separation between the wall and floor. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slab with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will restore the peace of mind of the homeowners for years to come! 

Customer, Judy of Elsberry, Missouri, had an issue with the pavement in her driveway: it was pulling away from the home's foundation. Not knowing what to do, she called woods Basement Systems for help. Systems design specialist, Brandon B., recommended PolyLevel for the job.

Foreman, Andrew T. did the job. PolyLevel works to permanently lift and stabilize concrete slabs with a high density polyurethane formula, or foam. Small, dime-sized holes are drilling into the pavement and then the polymer is injected into the void. The holes are covered with cement and the concrete can be used within 15 minutes.

So Judy H. can now safely use her driveway.